All 3 Rat types in 1 pedal! Original, Turbo and Dirty.

Uses the LM308 chip that the original Rat’s used and D9E NOS Soviet germanium diodes!

Itchy and Scratchy artwork with Krusty Burger drink cup knobs

All our pedals are housed in premium Gorva Design enclosures, use Gorva Design premium  footswitches, and are printed using high-definition UV printing. 

Barney Gumble Tubescreamer 808

Duff Muff Fuzz

Krusty The Clown Muff with Krusty Burger drink cup knobs

We are super chuffed to have teamed up with the awesome Govra Design to become their first U.K dealer. Gorva make extremely high quality parts which are both technically outstanding and aesthetically pleasing. Not only that – they are also wonderfully priced!

Premium 3PDT soft-clicking foot switches. Requires very little actuation force.

Spec Sheet: Click here

Power Rating: DC9V, 1A

Contact Resistance: Typically 10mΩ (30mΩ Max)

Insulation Resistance: DC 500V 100MΩ Minimum

Dielectric Strength: 500V RMS @ Sea Level

Operating Force: 1.0±0.3Kgf

Operating Temperature: -10°C ~ +70°C

Electrical Life: 30,000 Cycles

RoHS & Lead-free

Huge fuzz in a small pedal!

GØRVA Design S90 enclosure has similar dimensions to 1590BBM and measures 117.2mm x 90mm x 39mm (3.54″ x 4.61″ x 1.54″)

Data sheet: PDF

Printing/drilling template: PDF  SVG

DIY drilling tempalte: Top: PDF  SVG  Face/Sides:  PDF  SVG

Features:

• Beveled top and rounded corners for high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room and more flexible layout.
• Smooth, eggshell-like matte powder coating.

Christopher Moltisanti 808 with Gabagool knobs

Paulie Walnuts 808 with Gabagool knobs

Special offer – comes with a FREE Dark Meatboy Flanders fuzz

Principal Skinner Tubescreamer 808 with Steamed Hams 3D printed knobs!

Inspired by the classic 808 Tube Screamer, the Gojira 808 provides an overdrive which adds real analogue crunch and beautiful tone to your sound!

The Volume Knob controls the overall output volume.

The Tone Knob controls your tone from bass to treble.

The Gain Knob controls the amount of gain (overdrive).

Symmetrical/Asymmetrical diode clipping switch to give more range in your tone.

Bass Boost switch to increase the low end.

We are super chuffed to have teamed up with the awesome Govra Design to become their first U.K dealer. Gorva make extremely high quality parts which are both technically outstanding and aesthetically pleasing. Not only that – they are also wonderfully priced!

GØRVA Design C65 enclosure has similar dimensions to 125B and measures 120mm [4.72″] x 65mm [2.56″] x 39 mm [1.54″]

Data sheet: PDF

Printing/drilling template: PDF  SVG

DIY drilling template: Top: PDF  SVG  Face/Sides: PDF  SVG

Features:

• Slightly beveled top and rounded corners for high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room for more flexible layout.
• Smooth, eggshell-like matte powder coating.
• Recessed bottom lid

The Ruiner’s got a lot to prove

He’s got nothing to lose and now he made you believe…

The Reverie is a dreamy and characterful reverb pedal. With a wide tone control you can dial in dark, cave-like repeats or clear, sharp, chiming/shimmering echoes.
The pedal self-oscillates due to an internal feedback loop, creating some haunting, retro sounds.

Controls are Tone, Blend, Pre-Delay (feedback )and Reverb (Distance). The footswitches are Bypass and Wet Only.

Housed in black Gorva s90 enclosure with circle of fifths artwork in a gloss uv printed finish.

The Gojira Octave Generator offers 1 octave up, 1 down and 2 down with a clean blend.

Krusty the Clown Tubescreamer 808 with Krusty Burger cup 3D printed knobs!

Inspired by the classic 808 Tube Screamer, the Gojira 808 provides an overdrive which adds real analogue crunch and beautiful tone to your sound!

The Volume Knob controls the overall output volume.

The Tone Knob controls your tone from bass to treble.

The Gain Knob controls the amount of gain (overdrive).

Symmetrical/Asymmetrical diode clipping switch to give more range in your tone.

Bass Boost switch to increase the low end.

GØRVA Design S90 enclosure has similar dimensions to 1590BBM and measures 117.2mm x 90mm x 39mm (3.54″ x 4.61″ x 1.54″)

Data sheet: PDF

Printing/drilling template: PDF  SVG

DIY drilling tempalte: Top: PDF  SVG  Face/Sides:  PDF  SVG

Features:

• Beveled top and rounded corners for high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room and more flexible layout.
• Smooth, eggshell-like matte powder coating.

1. The Gojira Meatboy Fuzz comes in 3 flavors- Light ,Dark and Sub Dark (bass version)
   Light and dark versions are more suited to guitar while the sub dark version is tweaked for bass.