1 x Custom 3D printed  Knob

Fit tight on 6mm splined shaft pots

-Mr Sparkle

-Duff Beer

-Steamed Ham

-MexiCan

-Booty Sweat

-Bender Head

-Bender Brau

-Tegridy Farm

Mr Bender (sparkle) 808 with Bender head 3D printed knobs

Inspired by the classic 808 Tube Screamer, the Gojira 808 provides an overdrive which adds real analogue crunch and beautiful tone to your sound!

The Volume Knob controls the overall output volume.

The Tone Knob controls your tone from bass to treble.

The Gain Knob controls the amount of gain (overdrive).

Symmetrical/Asymmetrical diode clipping switch to give more range in your tone.

Bass Boost switch to increase the low end.

The Gojira Octave Generator offers 1 octave up, 1 down and 2 down with a clean blend.

We are super chuffed to have teamed up with the awesome Govra Design to become their first U.K dealer. Gorva make extremely high quality parts which are both technically outstanding and aesthetically pleasing. Not only that – they are also wonderfully priced!

GØRVA Design C65 enclosure has similar dimensions to 125B and measures 120mm [4.72″] x 65mm [2.56″] x 39 mm [1.54″]

Data sheet: PDF

Printing/drilling template: PDF  SVG

DIY drilling template: Top: PDF  SVG  Face/Sides: PDF  SVG

Features:

• Slightly beveled top and rounded corners for high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room for more flexible layout.
• Smooth, eggshell-like matte powder coating.
• Recessed bottom lid

3 Knob fuzz based on the Silicon Tone Bender MKII

With mode switch for 2 different fuzz flavours

+ Free Bender (bite my shiny metal ass meatboy fuzz)

Comes with Bender head knobs in a u.v printed Silver Gorva s90 enclosure

We are super chuffed to have teamed up with the awesome Govra Design to become their first U.K dealer. Gorva make extremely high quality parts which are both technically outstanding and aesthetically pleasing. Not only that – they are also wonderfully priced!

Premium 3PDT soft-clicking foot switches. Requires very little actuation force.

Spec Sheet: Click here

Power Rating: DC9V, 1A

Contact Resistance: Typically 10mΩ (30mΩ Max)

Insulation Resistance: DC 500V 100MΩ Minimum

Dielectric Strength: 500V RMS @ Sea Level

Operating Force: 1.0±0.3Kgf

Operating Temperature: -10°C ~ +70°C

Electrical Life: 30,000 Cycles

RoHS & Lead-free

Custom 3D-printed knobs

Give your pedal or guitar a facelift!

Fit tight on 6mm splined shaft pots.

Come in packs of 4

Special offer – comes with a FREE Dark Meatboy Flanders fuzz

Principal Skinner Tubescreamer 808 with Steamed Hams 3D printed knobs!

Inspired by the classic 808 Tube Screamer, the Gojira 808 provides an overdrive which adds real analogue crunch and beautiful tone to your sound!

The Volume Knob controls the overall output volume.

The Tone Knob controls your tone from bass to treble.

The Gain Knob controls the amount of gain (overdrive).

Symmetrical/Asymmetrical diode clipping switch to give more range in your tone.

Bass Boost switch to increase the low end.

Barney Gumble Tubescreamer 808

We are super chuffed to have teamed up with the awesome Govra Design to become their first U.K dealer. Gorva make extremely high quality parts which are both technically outstanding and aesthetically pleasing. Not only that – they are also wonderfully priced!

GØRVA Design C65 enclosure has similar dimensions to 125B and measures 120mm [4.72″] x 65mm [2.56″] x 39 mm [1.54″]

Data sheet: PDF

Printing/drilling template: PDF  SVG

DIY drilling template: Top: PDF  SVG  Face/Sides: PDF  SVG

Features:

• Slightly beveled top and rounded corners for high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room for more flexible layout.
• Smooth, eggshell-like matte powder coating.
• Recessed bottom lid

The Reverie is a dreamy and characterful reverb pedal. With a wide tone control you can dial in dark, cave-like repeats or clear, sharp, chiming/shimmering echoes.
The pedal self-oscillates due to an internal feedback loop, creating some haunting, retro sounds.

Controls are Tone, Blend, Pre-Delay (feedback )and Reverb (Distance). The footswitches are Bypass and Wet Only.

Housed in black Gorva s90 enclosure with circle of fifths artwork in a gloss uv printed finish.

Paulie Walnuts 808 with Gabagool knobs

Pack includes drill templates for M45, C65 (including top mount jacks) and S90 Gorva enclosures.

The Ruiner’s got a lot to prove

He’s got nothing to lose and now he made you believe…

Various Powder coated enclosures